HW-CC/HW-HC

- Heave Load Type Linear Guideways -

H Series

Applicable industries of H series:
Grinding,Milling, and Drilling machine,Lathe,Electric discharge machine, Wire cutting machine, Wood cutting machine,Precision measure equipment, Machine center

(1)Self-aligning capability
By design, the circular-arc groove has contact points at 45 degrees. H series can absorb most installation errors due to surface irregularities and provide smooth linear motion through the elastic deformation of rolling elements and the shift of contact points. Self-aligning capability, high accuracy and smooth operation can be obtained with an easy installation.
(2)Interchangeability
Because of precision dimensional control, the dimensional tolerance of H series can be kept in a reasonable range, which means that any blocks and any rails in a specific series can be used together while maintaining dimensional tolerance. And a retainer is added to prevent the balls from falling out when the blocks are removed from the rail.
(3)High rigidity in all four directions
Because of the four-row design, the H series linear guideway has equal load ratings in the radial, reverse radial and lateral directions. Furthermore, the circular-arc groove provides a wide-contact width between the balls and the groove raceway allowing large permissible loads and high rigidity.

Characteristic:

Precision: C, H, P.
Size: 15~45.
Lubrication block & 6 meter guideway available.
Various accessories, KK, DD, ZZ.
Korean material & Taiwan equipment.
Strict quality control.

Description

Model NO.	Dimensions of Assembly(mm)			Dimensions of Block (mm)															Dimensions of Rail (mm)							Mounting Bolt for Rail	Basic Dynamic Load Rating	Basic Static Load Rating	Static Rated Moment			Weight
																													M_R kN-m	M_P kN-m	M_Y kN-m	Block kg	Rail kg/m
	H	H₁	N	W	B	B₁	C	L₁	L	K₁	K₂	G	M	T	T₁	T₂	H₂	H₃	W_R	H_R	D	h	d	P	E	(mm)	C(kN)	C₀(kN)

HW15CC	24	4.3	16	47	38	4.5	30	39.4	61.4	8	4.85	5.3	M5	6	8.9	6.95	3.95	3.7	15	15	7.5	5.3	4.5	60	20	M4x16	14.7	23.47	0.12	0.10	0.10	0.17	1.45
HW20CC	30	4.6	21.5	63	53	5	40	50.5	77.5	10.25	6	12	M6	8	10	9.5	6	6	20	17.5	9.5	8.5	6	60	20	M5x16	27.1	36.68	0.27	0.20	0.20	0.40	2.21
HW20HC								65.2	92.2	17.6																	32.7	47.96	0.35	0.35	0.35	0.52
HW25CC	36	5.5	23.5	70	57	6.5	45	58	84	10.7	6	12	M8	8	14	10	6	5	23	22	11	9	7	60	20	M6x20	34.9	52.82	0.42	0.33	0.33	0.59	3.21
HW25HC								78.6	104.6	21																	42.2	69.07	0.56	0.57	0.57	0.80
HW30CC	42	6	31	90	72	9	52	70	97.4	14.25	6	12	M10	8.5	16	10	6.5	10.8	28	26	14	12	9	80	20	M8x25	48.5	71.87	0.66	0.53	0.53	1.09	4.47
HW30HC								93	120.4	25.75																	58.6	93.99	0.88	0.92	0.92	1.44
HW35CC	48	7.5	33	100	82	9	62	80	112.4	14.6	7	12	M10	10.1	18	13	9	12.6	34	29	14	12	9	80	20	M8x25	64.6	93.88	1.16	0.81	0.81	1.56	6.30
HW35HC								105.8	138.2	27.5																	77.9	122.77	1.54	1.40	1.40	2.06
HW45CC	60	9.5	37.5	120	100	10	80	97	139.4	13	10	12.9	M12	15.1	22	15	8.5	20.5	45	38	20	17	14	105	22.5	M12x35	103.8	146.71	1.98	1.55	1.55	2.79	10.41
HW45HC								128.8	171.2	28.9																	125.3	191.85	2.63	2.68	2.68	3.69
HW55CC	70	13	43.5	140	116	12	95	117.7	166.7	17.35	11	12.9	M14	17.5	26.5	17	12	19	53	44	23	20	16	120	30	M14x45	153.2	211.23	3.69	2.64	2.64	4.52	15.08
HW55HC								155.8	204.8	36.4																	184.9	276.23	4.88	4.57	4.57	5.96
HW65CC	90	15	53.5	170	142	14	110	144.2	200.2	23.1	14	12.9	M16	25	37.5	23	15	15	63	53	26	22	18	150	35	M16x50	213.2	287.48	6.65	4.27	4.27	9.17	21.18
HW65HC								203.6	259.6	52.8																	277.8	420.17	9.38	7.38	7.38	12.89
Note:1kgf = 9.81N